InitStressMaterial error

[SummitYan]

The H section of fiber with initial stress is defined.



uniaxialMaterial Steel02 1 235 206000 0.003 10 0.925 0.15

##InitStress for Rolling

uniaxialMaterial InitStressMaterial 101 1 78.3333333333333

uniaxialMaterial InitStressMaterial 102 1 0

uniaxialMaterial InitStressMaterial 103 1 -78.3333333333333

uniaxialMaterial InitStressMaterial 111 1 47

uniaxialMaterial InitStressMaterial 112 1 0

uniaxialMaterial InitStressMaterial 113 1 -47

uniaxialMaterial InitStressMaterial 121 1 78.3333333333333

uniaxialMaterial InitStressMaterial 122 1 0

uniaxialMaterial InitStressMaterial 123 1 -78.3333333333333

uniaxialMaterial InitStressMaterial 131 1 47

uniaxialMaterial InitStressMaterial 132 1 0

uniaxialMaterial InitStressMaterial 133 1 -47



##DHEA300

uniaxialMaterial Elastic 401 195303846.153846

uniaxialMaterial Elastic 501 665538461.538462

uniaxialMaterial Elastic 601 67855394580.1749

section Fiber 1 {

fiber -25 138 700 101

fiber -75 138 700 102

fiber -125 138 700 103

fiber 25 138 700 101

fiber 75 138 700 102

fiber 125 138 700 103

fiber 0.0 109.166666666667 371.166666666667 121

fiber 0.0 65.5 371.166666666667 122

fiber 0.0 21.8333333333333 371.166666666667 123

fiber -25 -138 700 101

fiber -75 -138 700 102

fiber -125 -138 700 103

fiber 25 -138 700 101

fiber 75 -138 700 102

fiber 125 -138 700 103

fiber 0.0 -109.166666666667 371.166666666667 121

fiber 0.0 -65.5 371.166666666667 122

fiber 0.0 -21.8333333333333 371.166666666667 123

fiber -10.2809343515354 124.969065648465 156.444738883261 1

fiber 10.2809343515354 124.969065648465 156.444738883261 1

fiber -10.2809343515354 -124.969065648465 156.444738883261 1

fiber 10.2809343515354 -124.969065648465 156.444738883261 1

}

section Aggregator 2001 401 Vy 501 Vz 601 T -section 1



OpenSees running is normal, but once useing of SP module by mpiexec –n OpenSeesSP.exe on XP 32bit /Win7 64bit always show the following error.



FEM_ObjectBrokerAllClasses::getNewUniaxialMaterial - - no UniaxalMaterial type exists for class tag 48

FiberSection2d::recvSelf -- failed to allocate double array for material data



Consult everybody, whether the SP module does not support the initial stress material, or there are other alternatives.
Any help will be appreciated.

[fmk]

i have fixed the problem in the source code .. the plan is to release the new version this wed, which will incllude the code change

[SummitYan]

Thank fmk.