Clean/erase LoadPattern definition inside the stat. analyses

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
pkante
Posts: 5
Joined: Mon Jun 14, 2004 10:27 pm
Location: University of Ljubljana, Faculty of Civil and Geodetic Engineering
Contact:
Contact pkante

Clean/erase LoadPattern definition inside the stat. analyses

Post by pkante »

How could I erase (wipe) LoadPattern (Plain) inside the analyses that were defined at the beginning of the analyse?
Inside the analyse I want to change the LoadPattern. If I use command "wipeAnalysis" the LoadPattern is still in the model.

I want to do the cyclic statical analyses in both horizontal (X, Y) directions [first one cycle in X direction and then one cycle in Y direction, and so on...] with STATIC analyses in OpenSEES. Is there any other option to do this kind of analyses?

Thanks a lot for the help.

BR,
Peter Kante
Top
Jhno
Posts: 214
Joined: Sat May 05, 2012 2:55 pm
Location: Laval

Re: Clean/erase LoadPattern definition inside the stat. anal

Post by Jhno »

Remove command?
http://opensees.berkeley.edu/wiki/index ... ve_Command
Top
pkante
Posts: 5
Joined: Mon Jun 14, 2004 10:27 pm
Location: University of Ljubljana, Faculty of Civil and Geodetic Engineering
Contact:
Contact pkante

Re: Clean/erase LoadPattern definition inside the stat. anal

Post by pkante »

Thanks, I have found it allready.
Top
Post Reply

Return to “OpenSees.exe Users”