Hi,
I am trying to model a 6 story 1-bay buckling restrained braced frame. I have the basic model, but I am trying to research how to define the material that will give the same results as a BRB material.
I found a post that says the is a uniaxial material for Steel BRB but I cant get the link. Another one says to use Steel02 and assign corotTruss. Could you please tell me what is the best way to define and model trhese braces?
Thank you
-Ruby
modeling BRB material in Opensees
Moderators: silvia, selimgunay, Moderators
-
rubyvicencio
- Posts: 1
- Joined: Tue Mar 03, 2015 10:33 am
- Location: San Francisco State University
-
lrywjy
- Posts: 2
- Joined: Tue May 12, 2015 6:55 pm
- Location: xian university of architecture and technology
Re: modeling BRB material in Opensees
Hi,
Have you solved worked out the problem? I am trying to model 3-story 1-bay reinforced concrete frame retrofitted with buckling-restrained braces model, and now I have not figured out how to realize it yet. Maybe we can have some discussions.
Have you solved worked out the problem? I am trying to model 3-story 1-bay reinforced concrete frame retrofitted with buckling-restrained braces model, and now I have not figured out how to realize it yet. Maybe we can have some discussions.