Problem with OpenSees 2.4.6. and Display recorder

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
Toutant
Posts: 32
Joined: Mon Sep 09, 2013 10:33 am
Location: École Polytechnique de Montréal

Problem with OpenSees 2.4.6. and Display recorder

Post by Toutant »

Hi,

I don't know if this issue has been already reported but I am getting this error message when I switch from OpenSees 2.4.5. to OpenSees 2.4.6. when I display the structure using display recorder

Truss::displaySelf() (element number...)

Also, when the structure is displayed using OpenSees 2.4.6. you can no longer see nodes. Switching back to OpenSees 2.4.5. and everything works fine.
Top
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:
Contact fmk

Re: Problem with OpenSees 2.4.6. and Display recorder

Post by fmk »

thanks .. i am redoing the display thing for a new application we will be releasing .. the first was a debugging statement that got left in.
Top
Post Reply

Return to “OpenSees.exe Users”