Error using MVLEM Element with version 2.4.6

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
Jinnaijia
Posts: 3
Joined: Sat Jun 15, 2013 4:22 am
Location: University

Error using MVLEM Element with version 2.4.6

Post by Jinnaijia »

Hi, everyone

I'm using MVLEM element in my shear wall model. So, I've downloaded the example using MVLEM (Example 1. MVLEM.zip).
It still does not working. There is something wrong with the initial stiffness matrix.
That really confuses me, so I just want to get some helps from here.Many thanks.

http://opensees.berkeley.edu/wiki/index ... r_RC_Walls

Regards,
Boya
fmk
Site Admin
Posts: 5884
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: Error using MVLEM Element with version 2.4.6

Post by fmk »

what revision number of OpenSees?
Jinnaijia
Posts: 3
Joined: Sat Jun 15, 2013 4:22 am
Location: University

Re: Error using MVLEM Element with version 2.4.6

Post by Jinnaijia »

Dear Frank,

Thanks for your reply. The revision number is 6062.
Post Reply