I have followed all the isntructions as in:
viewtopic.php?f=4&t=61445
I am still getting errors. Not sure what is happening. I run make in the SRC folder. Message:
Node.cpp: In member function ‘virtual const Vector* Node::getResponse(NodeResponseType)’:
Node.cpp
28: error: ‘Unbalance’ was not declared in this scopeelse if (responseType == Unbalance)
^
make[2]: *** [Node.o] Error 1
make[2]: Leaving directory `/usr/local/OpenSees/SRC/domain/node'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/local/OpenSees/SRC/domain'
make: *** [all] Error 2
My Makefile.def is:
# %---------------------------------%
# | SECTION 1: PROGRAM |
# %---------------------------------%
#
# Specify the location and name of the OpenSees interpreter program
# that will be created (if this all works!)
OpenSees_PROGRAM = $(HOME)/bin/OpenSees
OPERATING_SYSTEM = LINUX
GRAPHICS = NONE
GRAPHIC_FLAG = -D_NOGRAPHICS
PROGRAMMING_MODE = SEQUENTIAL
DEBUG_MODE = NO_DEBUG
RELIABILITY = NO_RELIABILITY
# %---------------------------------%
# | SECTION 2: PATHS |
# %---------------------------------%
#
# Note: if vendor supplied BLAS and LAPACK libraries or if you have
# any of the libraries already leave the directory location blank AND
# remove the directory from DIRS.
BASE = /usr/local
HOME = /usr/local
FE = $(HOME)/OpenSees/SRC
AMDdir = $(HOME)/OpenSees/OTHER/AMD
BLASdir = $(HOME)/OpenSees/OTHER/BLAS
CBLASdir = $(HOME)/OpenSees/OTHER/CBLAS
LAPACKdir = $(HOME)/OpenSees/OTHER/LAPACK
SUPERLUdir = $(HOME)/OpenSees/OTHER/SuperLU_4.1/SRC
ARPACKdir = $(HOME)/OpenSees/OTHER/ARPACK
UMFPACKdir = $(HOME)/OpenSees/OTHER/UMFPACK
METISdir = $(HOME)/OpenSees/OTHER/METIS
CSPARSEdir = $(HOME)/OpenSees/OTHER/CSPARSE
SRCdir = $(HOME)/OpenSees/SRC
DIRS = $(CBLASdir) $(AMDdir) $(CSPARSEdir) \
$(SUPERLUdir) $(ARPACKdir) $(UMFPACKdir) $(SRCdir) $(METISdir)
# %-------------------------------------------------------%
# | SECTION 3: LIBRARIES |
# | |
# | The following section defines the libraries that will |
# | be created and/or linked with when the libraries are |
# | being created or linked with. |
# %-------------------------------------------------------%
#
# Note: if vendor supplied BLAS and LAPACK libraries leave the
# libraries blank. You have to get your own copy of the tcl/tk
# library!!
#
# Note: For libraries that will be created (any in DIRS above)
# make sure the directory exsists where you want the library to go!
FE_LIBRARY = $(HOME)/lib/libOpenSees.a
NDARRAY_LIBRARY = $(HOME)/lib/libndarray.a # BJ_UCD jeremic@ucdavis.edu
MATMOD_LIBRARY = $(HOME)/lib/libmatmod.a # BJ_UCD jeremic@ucdavis.edu
BJMISC_LIBRARY = $(HOME)/lib/libBJmisc.a # BJ_UCD jeremic@ucdavis.edu
LAPACK_LIBRARY = $(HOME)/lib/libLapack.a
BLAS_LIBRARY = $(HOME)/lib/libBlas.a
SUPERLU_LIBRARY = $(HOME)/lib/libSuperLU.a
CBLAS_LIBRARY = $(HOME)/lib/libCBlas.a
ARPACK_LIBRARY = $(HOME)/lib/libArpack.a
AMD_LIBRARY = $(HOME)/lib/libAMD.a
UMFPACK_LIBRARY = $(HOME)/lib/libUmfpack.a
METIS_LIBRARY = $(HOME)/lib/libMetis.a
CSPARSE_LIBRARY = $(HOME)/lib/libCSparse.a
TCL_LIBRARY = /usr/lib/libtcl8.5.so
TCL_LIBRARY = /usr/lib/x86_64-linux-gnu/libtcl8.5.so
BLITZ_LIBRARY = $(HOME)/blitz/lib/libblitz.a
GRAPHIC_LIBRARY =
# WATCH OUT .. These libraries are removed when 'make wipe' is invoked.
WIPE_LIBS = $(FE_LIBRARY) \
$(LAPACK_LIBRARY) \
$(BLAS_LIBRARY) \
$(CBLAS_LIBRARY) \
$(SUPERLU_LIBRARY) \
$(ARPACK_LIBRARY) \
$(UMFPACK_LIBRARY) \
$(CSPARSE_LIBRARY) \
$(METIS_LIBRARY)
# %---------------------------------------------------------%
# | SECTION 4: COMPILERS |
# | |
# | The following macros specify compilers, linker/loaders, |
# | the archiver, and their options. You need to make sure |
# | these are correct for your system. |
# %---------------------------------------------------------%
# Compilers
CC++ = /usr/bin/g++
CC = /usr/bin/gcc
FC = /usr/bin/gfortran
AR = ar
ARFLAGS = cqls
RANLIB = ranlib
RANLIBFLAGS =
# Compiler Flags
#
# NOTES:
# C++ FLAGS TAKE need _UNIX or _WIN32 for preprocessor dircetives
# - the _WIN32 for the Windows95/98 or NT operating system.
# C FLAGS used -DUSE_VENDOR_BLAS (needed in SuperLU) if UNIX in C++ FLAGS
#
# modified as optimizaton currently causing problems with Steeln01 code
ifeq ($(DEBUG_MODE), DEBUG)
C++FLAGS = -Wall -D_LINUX -D_UNIX -D_TCL85 \
$(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG) \
-g -pg
CFLAGS = -Wall -pg $(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) $(PROGRAMMING_FLAG)
FFLAGS = -Wall
# Linker
LINKER = $(CC++)
LINKFLAGS = -g -pg
else
C++FLAGS = -Wall -D_LINUX -D_UNIX -D_TCL85 \
$(GRAPHIC_FLAG) $(RELIABILITY_FLAG) $(DEBUG_FLAG) \
$(PROGRAMMING_FLAG) -O3 -ffloat-store
CFLAGS = -Wall -O2
FFLAGS = -Wall -O
# Linker
LINKER = $(CC++)
LINKFLAGS = -rdynamic
endif
# Misc
MAKE = make
CD = cd
ECHO = echo
RM = rm
RMFLAGS = -f
SHELL = /bin/sh
# %---------------------------------------------------------%
# | SECTION 5: COMPILATION |
# | |
# | The following macros specify the macros used in |
# | to compile the source code into object code. |
# %---------------------------------------------------------%
.SUFFIXES:
.SUFFIXES: .C .c .f .f90 .cpp .o .cpp
#
# %------------------%
# | Default command. |
# %------------------%
#
.DEFAULT:
@$(ECHO) "Unknown target $@, try: make help"
#
# %-------------------------------------------%
# | Command to build .o files from .f files. |
# %-------------------------------------------%
#
.cpp.o:
@$(ECHO) Making $@ from $<
$(CC++) $(C++FLAGS) $(INCLUDES) -c $< -o $@
.C.o:
@$(ECHO) Making $@ from $<
$(CC++) $(C++FLAGS) $(INCLUDES) -c $< -o $@
.c.o:
@$(ECHO) Making $@ from $<
$(CC) $(CFLAGS) -c $< -o $@
.f.o:
@$(ECHO) Making $@ from $<
$(FC) $(FFLAGS) -c $< -o $@
# %---------------------------------------------------------%
# | SECTION 6: OTHER LIBRARIES |
# | |
# | The following macros specify other libraries that must |
# | be linked with when creating executables. These are |
# | platform specific and typically order does matter!! |
# %---------------------------------------------------------%
MACHINE_LINKLIBS = -L$(BASE)/lib \
-L$(HOME)/lib
MACHINE_NUMERICAL_LIBS = -lm \
$(ARPACK_LIBRARY) \
$(SUPERLU_LIBRARY) \
$(UMFPACK_LIBRARY) $(CSPARSE_LIBRARY) \
$(LAPACK_LIBRARY) $(BLAS_LIBRARY) $(CBLAS_LIBRARY) \
$(AMD_LIBRARY) $(GRAPHIC_LIBRARY)\
-ldl -lgfortran
MACHINE_SPECIFIC_LIBS =
# %---------------------------------------------------------%
# | SECTION 7: INCLUDE FILES |
# | |
# | The following macros specify include files needed for |
# | compilation. |
# %---------------------------------------------------------%
MACHINE_INCLUDES = -I/usr/include \
-I$(BASE)/include \
-I/usr/include/cxx \
-I$(HOME)/include -I$(HOME)/blitz
# this file contains all the OpenSees/SRC includes
include $(FE)/Makefile.incl
#TCL_INCLUDES = -I/usr/includes/tcl-private/generic
TCL_INCLUDES = -I/usr/include/tcl8.5
INCLUDES = $(TCL_INCLUDES) $(FE_INCLUDES) $(MACHINE_INCLUDES)
Do you have an idea why is this happening?
Thanks,
Luis